Sept-06-2022 - Tuesday Daily Update - Mohammad Elkady

Daily Update - Mohammad Elkady - (Sept-06-2022)

1.   What did I do today?

Today, I worked on the parameters ranges for the iFDP Aramco Project.

2.   What did I find interesting/Work on?

I went through all previous project in the Permian Basin and try to have a realistic range for the unconventional reservoir to apply in the other project.

Below are the tables with the parameters I chose that will serve as good estimates.

Primary Property (vary)	Units	Minimum	Mean	Maximum	Reason
Thickness	ft	50		400	Assumed
Horizontal Permeability	md	1E-06		0.001	Permian cores
Porosity	md	0.01		0.13	Permian cores
Pressure	psi		4900		Permian Res
Water Saturation	Unitless	0.35		0.70	Permian cores

Secondary Property (constant)	Units	Value
Irreducible water (Swirr)	Unitless	0.2	Assumed & HM using CMOST
Residual hydrocarbon (Srhc)	Unitless	0.2	Assumed & HM using CMOST
Bulk Compressibility	Psi-1	9.809E-06	Assumed & HM using CMOST
Perm Anisotropy

Tertiary Property (constant)	Model or Description
Rock Type
Fluid Composition		N/A in IMEX
Relative Permeability
Capillary Pressure		N/A in IMEX
Natural Fracture Distribution and Length	NF Por: 0.001, NF Perm: 0.0006 md, NF Spacing: 50 ft,	Assumed & HM using CMOST

 

 

 

 

 

 

 

 

 

 

 

Primary Property	Units	Minimum	Maximum
Target Depth
Target X
Target Y
Secondary Property (vary)	Units	Minimum	Mean	Maximum		Reason
Number of Hydraulic Fractures (Stages)
HF Fracture Spacing (Stage Spacing)	ft	100		300		Assumed & HM using CMOST
HF Half-Length	ft	100		300		Assumed & HM using CMOST

3.   What will I do next? 

I will discuss these values with Dr. Misra and see if he has any other suggestions, Also I will build a base case as a start.