Oct-20-2022 - Thursday Daily Update - Mohammad Elkady

 

Daily Update - Mohammad Elkady - (Oct-20-2022)

1.  What did I do today?

I have worked on the property generator code.

2.  What did I find interesting/Work on?

To solve the narrow production profile, we worked on having a wider range for our porosity and in turn the permeability and water saturation.

Attached below is the new range for the porosity values:

As we can notice the range now is from 2% to 14%, unlike the old one which was from 3% to 9%.

For the permeability range, it was changed by changing the porosity as it’s a function of porosity but also, changed some factors in its correlation to be:

 

So the distribution of the permeability turns out to be:

For the water saturation, we faced an issue with low porosity values. We got unrealistic values that are higher than 100% so we had to put a threshold of 80% water saturation.

The main issues we have now are:

§  We need to add more dependency between properties (High perm  High por)

§  Make sure that the well layer has better properties compared to the top and bottom layers

3.  What will I do next? 

I will try to work on these issues to generate better values for the properties